Описание
The oil cooler MX-18 is used for cooling oil, circulating in various systems of compressor plants, in lubrication and heat dissipation in high-performance mechanisms. MX oil cooler is a shell and tube heat exchanger, which consists of the following main parts: a housing, a collapsible tube bundle outer cover.
In the production of the oil cooler MX-18 in PC Boiler applied seamless steel tube 18х2 mm, which is welded to the tube plate by using argon. Piping of the oil cooler MX-18 is an all-in-one.
The principle of operation of the MX-18
Inside the body of the cooler is moving the cooled oil, and the inside tubular portion moves the cooling water. It must be remembered that the oil cooler MX-18 is heated to 90 C, so when placing equipment in the room is necessary to take into account!
One hour through the oil cooler MX-18 runs from 6 to 20 m3 of oil and from 10 to 15 m3 of water. The oil pressure is 1.6 MPa, water pressure is 0.6 MPa. Pressure loss in the oil cooler MX-18 is 0.1 MPa, the oil and 0.02 MPa in the water.
Характеристики
Характеристика | Значение |
---|---|
Обозначение: | МХ-18,0 |
Тепловой поток, кВт: | 120 |
Расход масла, м3/ч: | 6-20 |
Расход воды, м3/ч: | 10-15 |
Температура охлаждающей воды на входе, С: | 33 |
Рабочее давление по маслу, МПа: | 1,6 |
Рабочее давление по воде, МПа: | 0,6 |
Гидравлическое сопротивление по маслу, МПа: | 0,1 |
Гидравлическое сопротивление по воде, МПа: | 0,02 |
Длина аппарата, мм: | 2235 |
Масса, кг: | 280 |
Comments ()