The bottom trasferisce 650-3 AISI 304 is an integral part of the capacitor equipment from stainless steel / carbon steel. PC Boiler produces the bottom 650*3 steel AISI304 modern equipment company Sahinler method of planirovanie and on German machines by cold forming. Basic dimensions torospherical bottoms 650*3 conform to DIN 28011 "Bottoms trasferisca".
PC Boiler is the manufacturer of torospherical bottoms 650*3 steel AISI304 the following methods:
Cold stamping of bottoms of 650*3 AISI304 according to DIN 28011.
Cold planirovanie 650*3 AISI304 GOST 52630-2006.
Cold stamping toreference bottoms according to DIN 28011 650*3 steel AISI304 takes place in the following way: prior to stamping, we can cut the blank for the bottom 650*3 AISI304 and it is served in a special machine with necessary equipments for this the diameter of the bottom. Shaping takes place by hydraulic impact to the workpiece multi-ton pressure, then the obtained toreference the bottom of 650*3 steel AISI304 is ready.
Cold planirovanie toreference bottoms GOST 52630-2006 650*3 steel AISI304 is as follows: the workpiece in the cold state is supplied to the hydraulic press where the initial forming is required of the internal radius of the bottom. Next, the resulting billet we moved to planirovochnuju machine Sahinler. With the help of rollers edging machine is gradually shaping for a given program.