Описание
The salt dissolvers With 0,5-0,7 is designed for the preparation of solutions of table salt and ammonium sulfate during the regeneration of cationite filters FIPA in industrial and heating boiler-houses. The salt dissolvers With 0.5 and 0.7 are also needed to clean impurities from mechanical regeneration solution of technical salt and is used in the system of softening raw water, together with sodium-cationite filters.
The salt dissolvers With 0.5-0.7 represents a vertical cylindrical apparatus with elliptical bottoms of an inner diameter of 700 mm, mounted on 3 supports; be equipped with piping, valves and instrumentation.
As a rule, in quality a filtering material in the salt dissolvers With 0,5-0,7 use quartz or anthracite.
Periodically (approximately every six months) of the inner surface of salt dissolvers With 0,5-0,7 should be cleaned from dirt and corrosion, performed an audit of the drainage device and valve. It should be noted that the filter material is discharged through the fitting gidrofilnosti. After cleaning and revision of the salt dissolvers With 0,5-0,7 re-loaded filter material.
Характеристики
Характеристика C-0,5-0,7 | Значение |
---|---|
Вместимость корпуса, м3 | 0,5 |
Давление рабочее, МПа | 0,6 |
Давление пробное, МПа | 0,9 |
Температура, С | 40 |
Диаметр солерастворителя, мм | 700 |
Высота солерастворителя, мм | 1800 |
Масса, кг | 238 |
Документация
Масса засыпного материала | Значение |
---|---|
Соль NaCl или KCl | 60 кг |
Масса фильтрующей загрузки (кварц) | Значение |
---|---|
Верхний слой (зерно 1,0-2,5 мм) h=200 мм | 137 кг |
Средний слой (зерно 2,5-5,0 мм) h=160 мм | 72 кг |
Нижний слой (зерно 5,0-10,0 мм) h=200 мм | 112 кг |
Масса фильтрующей загрузки (антрацит) | Значение |
---|---|
Верхний слой (зерно 1,0-2,5 мм) h=200 мм | 68,5 кг |
Средний слой (зерно 2,5-5,0 мм) h=160 мм | 36 кг |
Нижний слой (зерно 5,0-10,0 мм) h=200 мм | 56 кг |
Comments ()