Описание
The salt dissolvers With 2.0 and 1.0 is designed for the preparation of solutions of table salt and ammonium sulfate during the regeneration of cationite filters FIPA in industrial and heating boiler-houses. The salt dissolvers With 2.0 and 1.0 are also needed to clean impurities from mechanical regeneration solution of technical salt and is used in the system of softening raw water, together with sodium-cationite filters.
The salt dissolvers With 2.0 and 1.0 is a vertical cylindrical apparatus with elliptical bottoms of an inner diameter of 1000 mm, mounted on 3 supports; be equipped with piping, valves and instrumentation.
As a rule, in quality a filtering material in the salt dissolvers With a 2.0-1.0 to use quartz or anthracite.
Periodically (approximately every six months) of the inner surface of salt dissolvers With 2.0 and 1.0 should be cleaned from dirt and corrosion, performed an audit of the drainage device and valve. It should be noted that the filter material is discharged through the fitting gidrofilnosti. After cleaning and revision of the salt dissolvers With 2.0 and 1.0 of the newly loaded filter material.
Характеристики
Характеристика C-2,0-1,0 | Значение |
---|---|
Вместимость корпуса, м3 | 2,0 |
Давление рабочее, МПа | 0,6 |
Давление пробное, МПа | 0,9 |
Температура, С | 40 |
Диаметр солерастворителя, мм | 1000 |
Высота солерастворителя, мм | 3000 |
Масса, кг | 550 |
Документация
Масса засыпного материала | Значение |
---|---|
Соль NaCl или KCl | 240 кг |
Масса фильтрующей загрузки (кварц) | Значение |
---|---|
Верхний слой (зерно 1,0-2,5 мм) h=400 мм | 500 кг |
Средний слой (зерно 2,5-5,0 мм) h=200 мм | 250 кг |
Нижний слой (зерно 5,0-10,0 мм) h=400 мм | 230 кг |
Масса фильтрующей загрузки (антрацит) | Значение |
---|---|
Верхний слой (зерно 1,0-2,5 мм) h=400 мм | 250 кг |
Средний слой (зерно 2,5-5,0 мм) h=200 мм | 125 кг |
Нижний слой (зерно 5,0-10,0 мм) h=400 мм | 115 кг |
Comments ()